NOTE: To retain functionality of the rear brake light, a brake light pressure switch (linked below) is required. These rearsets do not retain usage of the factory spring-operated brake light switch.
The Vortex V3 2.0 Rearset kit is the same one that's being used by our race team partner M4 Ecstar Suzuki. In Superbike, #85 Jake Lewis is racing on these same rearsets. That means there's extra development in these rearsets from because of the feedback Vortex get's from the race team. The race team cannot have issues with critical parts like these because when something goes wrong, that means Jake isn't racing, and that's a huge problem for everyone involved.
Replacement Parts: Please see "Spare Parts" Tab above to view and purchase replacement parts for this Vortex Rearset Kit.
This kit will allow you to use standard or GP shift. You can use the kickstand or it has a bracket so you can remove the kickstand if you're doing a race only application. The rearsets do not have any mechanical provisions for the rear brake light switch. If you will be riding on the street, you can replace the banjo bolt on the rear master cylinder with a Vortex banjo brake light switch.
Vortex Rearsets are designed to perform at the highest level on the race track and are equally at home on the street. CNC machined from solid billet aluminum; they are light, strong and offer an excellent range of adjustability which allow the rider to personalize the ergonomics of their motorcycle. Vortex offers the highest level of product support in the industry with replacement parts readily available if needed.
Instructions and Exploded View
Peg Adjustment Instructions
Brake Side - Vortex V3 2.0 Design
- 32 Position Footpeg
- Laser Engraved Adjustment System
- Rotating Footpeg and Toe Peg Adjustment
- 2 Position Rotating Toepeg
- 3D Machined Heel Guards to Help Prevent Boot Interference
- Bearing Supported Levers
|  |
Clutch Side - Can Be Used in Either Standard or GP Shift
- Vortex V3 2.0 Design
- 32 Position Footpeg
- Laser Engraved Adjustment System
- Rotating Footpeg and Toe Peg Adjustment
- 2 Position Rotating Toepeg
- 3D Machined Heel Guards to Help Prevent Boot Interference
- Bearing Supported Levers
|  |