Woodcraft Yamaha FZ-09 / MT-09 18-24 Clip-On Riser Set w/Long Black Bars

Woodcraft's new FZ09 adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. You now have the option to flip your 1 inch adapter plate upside down, which results in a more aggressive riding position that improves both traction and feel. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.

Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash.

Note: This kit is designed to be used primarily in the up position. Using the 1 Inch Rise Kit in the down position requires the use of 10mm spacers and users should note that at full lock the controls may make light contact with the fuel tank during the last few degrees of bar movement. Here are some approximate bar movement examples to help you determine how you would like to install them. The 1 inch riser setup can be run in either the "up" or "down" position. The 1.5 inch and 2 inch risers should only be run in the "up" position.

Woodcraft FZ-09 Clip-on Riser Guide

• 1 inch rise, up position - 2 inch drop over OEM
• 1 inch rise, down position - 3 inch drop over OEM *Track only. Requires 10mm spacers and steering stop travel limiters
• 1.5 inch rise, up position - 1.5 inch drop over OEM
• 2 inch rise, up position - 1 inch drop over OEM

This kit comes standard with black handlebars.

Instructions and Exploded View