***Closeout***
TECHNICAL FEATURES
Meet the new Replica jacket: MotoGP looks with built-in practicality. Whether you want to combine it with the GT-R trousers as a full leather suit, or you connect it to our riding jeans using the jeans loop, the Replica Jacket has it all. Thanks to a detachable thermal body warmer the jacket is also well suited for cooler days. It borrows its aggressive styling from the Replica One Piece suit, which is also shown by the dual-comp protectors on the shoulders and elbows. Together with CE rated armor these features provide high impact protection and race looks.
Outershell - Monaco Performance cowhide - T his top-grain leather not only has had its surfaces sanded to correct imperfections, it has been reinforced to up its performance factor for riding on the track or street. Long-lasting and extremely protective.
- Lorica -Lorica is constructed from microfibres that give the material characteristics similar to those of natural leather, including a leather look. This low-maintenance material is not as strong as leather, but softer and lighter, with a consistent thickness that makes it easier to process.
- PWR|shell 500D stretch - T his material is Rev'It!'s take on Cordura . Consisting of 100 percent high-performance polyamide yarns, PWR | shell takes the best properties of Cordura - a high melting point, tremendous tear- and abrasion-resistance, excellent durability - and puts the unique Rev'It! design stamp on it. This PWR | shell fabric comes in a stretch variant. 500D indicates the density of the fabric. The higher the number the better the abrasion- and tear resistance properties are.
- Neoprene - Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
Protection - ProLife CE protection - Official tests show that ProLife far surpasses the protection standards set by the CE directive. The fabric used, elastomer, is the result of many years of research and development. A technological process is used to make the fabric microporous, with air in the microporous cells under high pressure but unable to escape. This treatment makes the fabric light, flexible, and exceptionally impact-resistant. Rev'It! has used the pre-shaped ProLife 3D CE protector in Rev'It! motorcycle clothing since it was first introduced.
- Prepared for SEESOFT CE-level 2 back protector insert - Type RV - The back protector pocket in this Rev'It! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
- Dual-comp protector - TPU aluminium protector at shoulders, elbows, and knuckles. The dual-comp protector consists of a 3D, pre-shaped honeycomb structure of TPU material, topped by an aluminium high-impact shield, for ultimate sliding. This lightweight hard part increases the level of protection significantly, without adding the considerable weight of traditional plastic hard parts. When fighting G-forces, every gram counts! Under the shoulder and elbow parts is ergonomically shaped, CE-approved armour, perfectly placed to maximize impact-resistance while preserving freedom of movement.
- Safety stitching - Stitching seams can be the weakest link in motorcycle garments, as they can rip upon impact. This ripping of seams can be prevented, however, through safety-stitching technology. Rev'It! uses safety stitching on garment areas at increased risk of impact (directive on the definition of risk category in zones 13595-1:2002).
- Safety seams - The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why Rev'It! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn.
- Composition - 88% Leather, 11% Polyamide, 1% Elastane
Ergonomic
- Adjustability - adjustment tab, adjustment strap
- Ventilation - partly perforated outer shell
- Features - stretch lips, comfort cuffs
- Stretch panels -The stretch panels in this garment aid in flexibility. They contribute to the riders comfort as they provide great freedom of movement.
- Short and double long connection zipper - Thanks to the short and long connection zipper, this jacket is/these trousers are compatible for pairing with any pair of trousers/any jacket in the Rev'It! line.
- Jeans loop - The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.
- Pockets - slit pockets, inner pockets, document pocket
