Well built. Fits well. Sturdy.
Total Price:Add to Cart
The Pit Bull Hybrid One Armed features a removable handle which allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side, but only to the rear on the non-drive side of most motorcycles.
When installed on the drive side, it allows wheel removal; when installed on the non-drive side, it allows easy sprocket removal. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling.
Sold complete, but pins are interchangeable to fit other bikes. When you add this item to your basket, you will have the option to add the pin for the non-drive side of the bike.
If your 1098 is one of the first 2007 models to arrive from Italy, select "Right Pin Only" from the drop-down menu when you add the item to your basket because the hole on both sides of the early '07 models were the larger size, whereas all future shipments were slightly smaller on the left side.
Fits Ducati 1098, 1198, 1199, 1299, Diavel, xDiavel, Multistrada 1200, Monster 1200, Streetfighter 1098/1198, or '17 Ducati SuperSport. Will fit Ducati Panigale V4 but will not lift it high enough for use of tire warmers at this time.
NOTE: Does NOT fit Ducati 998, 996, 916, 848, 748, Monster 796, 848 Streetfighter, HyperMotard, Monster 1100, Monster S4R, Monster S2R, Multistrada 1000, M900E, or Diavel (right side).
DIAVEL OWNERS: For the Diavel the wide tire makes it impossible to insert the pin fully on the right side, so the only available option is the standard which lifts the bike from the left side. There is currently no stand or pin that is recommended for the right side of the Diavel.
Sold complete, but pins are interchangeable to fit other bikes. If you would like to use this stand from BOTH the Drive and Non-Drive Side of your bike you will need BOTH PINS. If this is the case please select "Both Pins" in the drop down menu.