Motion Pro T-Handle Bit Driver with #1, #2, #3 JIS Crosshead Bits

Have you ever noticed that tiny little dot on a Phillips head screw on a Japanese motorcycle? Have you ever noticed that for some reason, it's always harder to remove these screws with a Philips head screwdriver? That's because they are not a Philips head! That small dot indicates that it is a JIS cross head screw, which is slightly different from the more common Philips head, but they are widely used on Japanese motorcycles. A Philips head screwdriver is shaped wrong and will cam out of a JIS cross head screw, which is why you see all those damaged screw heads on older Japanese motorcycles. Once more, Motion Pro comes to the rescue. The new Motion Pro T-Handle Bit Driver comes with three JIS cross head bits, ready to remove those stubborn screws with a better fit, more bite, and less damage to the screw head. There are magnets in each end of the T-Handle, so all three bits can be stored with the tool, and you can easily move them to the proper position depending on the job at hand. Believe me, when you use a T-Handle on cross head screws, you will never go back to a standard screwdriver again!

Product Features:

• High quality Motion Pro standard bit driver T-handle
• Features three 1/4 inch drive heads, one at end of shaft and two at each end of handle with magnets to hold drivers firmly in place
• Includes high grade S2 tool steel JIS cross-head bits no. 1, no. 2, and no. 3, but also accepts all common driver bits
• The included JIS cross-head bits are a must have for most Japanese made bikes and work equally well on traditional Phillips head screws. Use of traditional Phillips driver on JIS cross head screws will damage screw head.
• Narrow drive head profile fits into tight spaces
• Chrome vanadium handle and shaft
• Durable chrome finish on shaft and handle
• Shaft is 8.5 inches long
• Limited lifetime warranty