AiM Solo 2 DL GPS Lap Timer & Data Logger

AiM Solo 2 DL: The Gold Standard GPS lap timer & data logger for motorsports

Solo DL 2 features all the functions of Solo 2, plus the ability to connect to your motorcycle's ECU: this makes the Solo DL 2 a powerful dash logger recording all the important data coming from the vehicle Engine Control Unit. Additional sensors and complicated wiring are not required anymore.

Solo DL 2 comes standard with your choice of an OBDII connector for stock ECU's equipped with an OBDII diagnostic port, or with a unterminated CAN/RS232 cable for interfacing with racing/aftermarket ECUs or Euro5 compliant motorcycles¹.

Bike-specific harnesses that allow plug-and-play connectivity with your bike's ECU are also available for an additional $20. If selected when you order, the plug-and-play harness will be included with your timer instead of the standard universal harness.

Bike-specific harnesses are only available for certain motorcycles. Please use the information below to find which cable is compatible with your bike. 

 ¹ - The Euro5 standard was introduced as required for the 2020 model year and onwards. Most if not all motorcycles have made this change in their motorcycles for all markets, including the USA market.
Before ordering for this application, be sure to check under your motorcycle's seat / in the tail to confirm that this red 6-pin diagnostic connector is present.

Euro5 diagnostic connector

² - AiM recommends to NOT remove the stock dash on these models. Doing so will disable some of the bike functions or safety controls. AiM will not be held responsible for any consequence that may result from the replacement of the original instrument cluster.

³ - While these models can use either the CAN cable or Euro5 cable, we recommend the Euro5 cable for a hassle-free, non-splice connection.

The most precise and easy way to get lap times

The new Solo 2 receives the data from two satellites constellations, GPS and Glonass: this is a huge step forward since it is unbelievably faster and more precise than the previous version. 
The power ON requires only a few seconds and the lap times are calculated with a max 2/100 sec of tolerance.

The screen can be backlit in seven different colors

Find your track easily and quickly

Solo 2 can rely on a database of more than 3,000 tracks all over the world: as soon as it switches on, Solo 2 identifies its position, recognizes the starting line coordinates of the track and starts sampling lap times. 

In case the track is not in the database, no problem: Solo 2 realizes it and enters into the auto-learning mode, automatically understands the characteristics of the track and gives the lap time anyway.

Predictive lap times

The predictive lap time function is much more reliable in the new Solo 2, and the configurable RGB LEDs will give you a clear and fast indication of the comparison with your best lap.

Race Mode Selection

Solo 2 can manage different types of races:

• Speed races in a closed circuit
• Point-to-point races
• Regularity
• Performance tests (0-60mph, etc.)

In each of these configurations, Solo 2 gives the proper information during the test and powerful data review immediately after each session.

Data recall on screen

At the end of your test, you can quickly review all the key information on your display.

Wi-Fi Enabled

Wi-Fi connection: easy, fast, without connectors nor cables: the best way to configure your Solo 2, to manage the track database, to download the data to your PC.

ECU Connectivity

• More than 1,000 protocols for 1,000+ ECU's in AiM's database
• Option to build your own ECU drivers, if AiM does not have a configuration for your ECU available
• Coil RPM Input: Solo 2 DL now features a digital input allowing you to log RPM either from square wave or pulse signals

V02589130 

V02589130