AiM Solo 2 12V Charging Cable
Unterminated
Cable Specs:
- Solo 2 connection via 5-pin 712 binder
- Unterminated end with 2 wires: 12V+ & ground
- Length: 2m
Intended to create a hardwired power source for your AiM Solo 2. Is also compatible with the AiM Solo 2 DL, but isn't necessary so long as your Solo 2 DL is connected to the motorcycle via its ECU harness.
We recommend using an ignition switched 12V source for this harness, to eliminate the risk of draining your motorcycle's battery.
Write Review
-
AIM SOLO 2 12V CHARGING HARNESS
I’ve been thinking of doing this for a long time now, this takes away the need to remember to charge your lap timer. Installation was a snap I hooked it up to the battery, now at the end of the day all I need to do is unplug it from the Aim Solo and I’m good till the next race weekend. STG has been a great they always seem to have what I’m looking for and shipping gets it here in plenty of time.
-
12v Wire In for Solo2
Used this to direct wire a Solo2 (non DL) into accessory wiring on a zx636. Works perfect. Powers up with bike on switch. Great because I move my Solo2 between bikes and a car. All have power wiring, which means one less thing to charge up prior to track day.
- Availability:
- STG Part Number:
- A|2499-V02589010|0
- Manufacturer's Part Number:
- 1
